Инструкция пользователя altronics al-450 kit

инструкция пользователя altronics al-450 kit
Approx. 2 dBi UHF 2.2 5.6 90 D130NJ 2m / 70cm / 23cm 25–1300 MHz. Wideband Discone. The tools needed for testing either a 2 or 3 wire speed sensor are essentially a multimeter with the clamp leads, and a drill. Length Foot Wind MPH D130J 2m / 70cm / 23cm 25–1300 MHz. Wideband Discone. Don’t forget to take a look at the large selection of testing equipment available through Speedway Motors by clicking here! Комплект беспроводной сигнализации Ajax StarterKit — базовый комплект домашней сигнализации, который может легко расширяться другими устройствами Ajax. Contact one of your local Diamond® Dealers for current price & availability.


First off is testing the 2 wire speed sensor. You’ll still use your multimeter with the clamp leads, and after attaching power and ground, you’ll piggyback the ground (black) lead to the external source ground, and attach the red lead to the output on the sensor. Интеллектуальный центр сигнализации, Ajax Hub, консолидирует возможности каждого отдельного охранного датчика в единую экосистему. These sensors are self powered, meaning the revolutions inside the case generate the signal needed to create movement in the speedometer.

Since the 3 wire sensors are externally powered, you will need to have a power source of some kind if you are testing outside of the vehicle. Testing a 3 wire (Hall Effect) speed sensor is nearly as simple. Your vehicle could start to act like it has a bad coil pack or throttle position sensor, and after testing those you may still come up empty handed. Оставаясь на сайте, вы тем самым даете свое согласие на участие в данном исследовании. This is when you would want to test your 2 or 3 wire speed sensor, as faulty units can also cause these issues. Обращаем ваше внимание, что вы можете изменить настройки браузера в любое время.

Похожие записи: